24/7 emergency service · Duluth, Superior & 45 miles · licensed in MN & WI

Mon–Fri 7:00am–5:30pm, Sat 8:00am–2:00pm

Poplar, Wisconsin · Douglas County

Furnace Repair in Poplar, WI

My furnace is not heating and it is cold right now. About 25 minutes east of Superior.

$89 diagnostic, credited toward the repair when you approve the work. Answered 24/7 in Poplar and everywhere inside 45 miles.

Last reviewed

Short answer

What goes wrong with furnaces in Poplar, WI, and what does a repair cost?

Most Twin Ports furnace repairs are finished in one visit. Our diagnostic is $89 and is credited toward the repair when you approve it. In Poplar: Propane throughout, and it needs technicians who treat it as its own fuel rather than a natural-gas variant. We are 17.4 miles out — about 25 minutes east of Superior.

On this page
  1. What is different about furnace repair in Poplar
  2. Poplar in practice
  3. What we actually see in Poplar
  4. How much does furnace repair cost in Poplar?
  5. Signs you need furnace repair
  6. Furnace Repair in Poplar — questions
  7. Poplar at a glance
  8. Rebates you may qualify for

What is different about furnace repair in Poplar

Poplar is propane country, which changes both the service work and the economics: propane needs different orifices, higher manifold pressure and real combustion verification, and its cost per BTU makes a heat pump more attractive than it would be in town.

Inland from the lake, Poplar sees colder nights and larger daily swings than the Duluth lakefront on the same date, so the heating load is genuinely higher for the same house.

A village core of modest older homes plus rural acreage and farmsteads. Propane forced air standard, wood heat common, and a good number of newer rural builds on larger parcels.

Poplar in practice

Poplar is a village of a few hundred with a school, a main street and farmland around it, twenty-five minutes east of Superior on Highway 2. Propane is the fuel and wood does real work. The village housing is modest and older; the surrounding township is acreage with a mix of vintages. What Poplar customers generally want is a contractor who will actually come out this far and who knows propane properly rather than treating it as a variant of natural gas — the orifice, manifold pressure and combustion differences are real, and a conversion done without combustion testing is a genuine safety issue. Highway 2 access keeps winter response reliable, and we are out this way regularly.

What we actually see in Poplar

  • Propane throughout, and it needs technicians who treat it as its own fuel rather than a natural-gas variant.
  • Wood heat is common, and its combustion-air interaction with propane appliances needs worst-case testing.
  • Highway 2 keeps winter access reliable — we get out here regularly, in both directions.
  • Hard well water means water heaters need flushing and anode-rod attention.
  • Focus on Energy rebates plus expensive propane make heat pump retrofits worth pricing.

How much does furnace repair cost in Poplar?

$180–$900

A flame sensor or ignitor is usually $180–$350 installed. Inducer or blower motors run $450–$900.

Ranges are typical installed costs in the Twin Ports area, not quotes. We give you a firm price in writing before any work starts.

furnace repair pricing

Signs you need furnace repair

  • The furnace lights, runs for 5–10 seconds, then shuts off — and repeats it several times before going quiet (classic flame sensor)
  • You hear the blower but the air coming out is cool or lukewarm
  • Short cycling — it turns on and off far more often than it used to
  • A hard 'boom' or delayed ignition sound when it fires
  • The furnace runs constantly and never satisfies the thermostat on a cold night
  • A burning or hot-metal smell that does not fade after the first fire-up of the season
  • Water pooling around the base of a high-efficiency furnace
  • Any carbon monoxide alarm — leave the house and call the gas utility first, then us

Furnace Repair in Poplar — questions

Do you do furnace repair in Poplar, WI?

Yes. Poplar is 17.4 miles from Superior — about 25 minutes east of Superior.

What are homes in Poplar like, and how does that affect furnace repair?

A village core of modest older homes plus rural acreage and farmsteads. Propane forced air standard, wood heat common, and a good number of newer rural builds on larger parcels. Wood heat is common, and its combustion-air interaction with propane appliances needs worst-case testing.

What does furnace repair cost in Poplar?

Typically $180–$900, the same as anywhere else in our 45-mile area — we do not price by distance. A flame sensor or ignitor is usually $180–$350 installed.

How soon can you get to Poplar for furnace repair?

Same-day is the normal outcome for repair calls — Poplar is about 25 minutes east of Superior.

Does homeowners insurance cover furnace repair?

In Poplar, usually not for normal wear and age, which is what most furnace failures are. Some policies cover damage from a sudden covered event such as a power surge, fire or a burst pipe, and the water damage that follows a no-heat freeze is often the bigger claim. Check your own policy; we provide the written diagnosis and invoice an insurer will ask for.

How fast can you get here if I have no heat?

In Poplar, no-heat calls come first, ahead of maintenance and installs, and we run them 24/7 including holidays. Inside the core area — Duluth, Superior, Hermantown, Proctor, Esko, the Douglas County townships — same-day is the normal outcome and often within a few hours. From the edge of the 45-mile area we will give you an honest window rather than an optimistic one.

From the blog — furnace repair in Poplar

All posts →

More on Furnace Repair

This page covers what is specific to Poplar. For the full technical detail — how the work is done, what fails and why, and the complete cost breakdown — see our main furnace repair page.

Furnace Repair in full →

Other work we do in Poplar

Furnace Repair in nearby towns

We cover the whole 45-mile area from the same trucks, so Poplar and the towns around it are the same day's work.

All 66 towns we serve →

Poplar at a glance

County
Douglas County, Wisconsin
ZIP codes
54864
Distance
17.4 miles from Superior
Typical response
About 25 minutes east of Superior
Heating fuel
Propane / LP
Climate
Inland — colder nights and larger swings than the lakeshore
Rebate program
Focus on Energy (Wisconsin)

Nearby communities we also serve

All 66 towns we serve →

Rebates you may qualify for

This service area spans several different utility programs, and which one applies depends on your address and fuel. We identify the ones you qualify for, install to the tier that actually earns them, and file the paperwork.

  • Focus on Energy

    Wisconsin — Superior and Douglas/Bayfield County furnaces, boilers, heat pumps, smart thermostats; statewide WI program

Program amounts and qualifying equipment tiers change, so we verify current values at quote time rather than publishing numbers that go stale. More on rebates.

Need furnace repair in Poplar?

About 25 minutes east of Superior. We answer 24 hours a day, every day of the year. $89 diagnostic, credited toward the repair when you approve the work.

Call 24/7 — (218) 461-1049